PRINTING SUBASSEMBLY |
Printing method: | Thermal, horizontally-aligned points |
Number of points in line: | 384 |
Number of heating elements : | 2 per point |
Resistance of heating elements: | 142 Ohm per point |
Printing width: | 48 mm |
Density of points – resolution : | 8 points / mm |
Minimal paper shift : | 0.125 mm |
Printing speed : | 50 mm / sec. |
Header overheating detection system: | Thermistor unit |
Paper and receipt-end sensor system: | Phototransistor system |
Nominal tension of printer head : | 5 V DC |
Electrical capacity : | 3.8 A during printing with 64 points per line |
Durability, longevity : | 50 million signs |
PRINTING SYSTEM |
Character set : | International ASCII, Graphic IBM, Polish characters |
Printing of graphical characters : | Command set addressing individual print points. Memory for LOGO storage. Commands recognizing presence or absence of black signs at the end of receipt. |
Bar codes available: | Codes : 39,128, 2 of 5,UPC-A,UPC-E, UPC/EAN-8,UPC/EAN-13, Codabar. |
Control system : | Command set for control of: battery tension, header temperature, condition of printer jobs, program version . |
Memory for one line of print : | Standard 32 Kb |
Number of characters on one line : | 24 , 32 , 38 , 40 , 42 , 48 as selected using commands |
Character sizes: | 3x2 , 3x1.5 , 3x1.15 ,3x1 ( height x width in mm) |
Contrast : | User-defined through commands |
Printing options : | Double height, double width, boldface |
COMMUNICATION SYSTEM |
Available standards : | Serial port type RS232, IrDA, Bluetooth with speeds of : 2400, 9600,19200,38400 baud set by switch type DIP |
Transmission speed for fast IrDA : | To 38.4 kbaud depending on computer’s parameters |
Transmission speed for standard IrDA : | To 9.6 kbaud |
Communication protocol : | CTS/RTS and/or XON / XOFF |
PAPER PARAMETERS |
Width : | 57 mm ( 2.25 inches) |
Paper roll diameter : | 38.4 mm ( 1.5 inches) |
Length of paper in roll : | 18.3 m assuming internal diameter of 10.25 mm |
Number of lines printed per roll : | 5200 |
Print quantity assuming charged battery : | 6 roles |
Number of printed lines with fully charged battery: | 30 000 |
POWER SUPPLY |
Stationary power supply: | - from AC line : - without battery in printer Power Cord model 159999-2 Plug 7.5 V / 3.5 A – with battery in printer Power Cord model 157220 –automobile charger – without battery in printer Power Cord model 151134 - with battery in printer Power Cord model 151131 |
Portable power supply: | From battery charged via charger attached to AC 220, 50Hz line |
Batteries : | Two Lithium-Ion cells |
Charger : | 220V AC, 50Hz on 10V DC at 1.4 A model 157220 |
Charging system: | 180 min using quick charge system with overheating protection, power surge protection, and overload protection. |
Power control: | With help of ON/OFF switch, via RTS signals from serial port, via commands from serial port. Automatic timed system for disconnecting of power or disconnected by programmer. |
ERGONOMICS – OPTIONS |
Display panel : | 3 control lights, two with dual functions: - Power / Error - Charging - Ready / Fault |
Switches: | 2 switches, one with dual function: - ON / OFF – Feed paper |
Connections: | RJ-type socket ( 6 pin ) for data transmission, socket for connecting charger, IrDA communication window. |
Optional: | Available for installation: magnetic card reader (MCR), Bluetooth |
External dimensions: | 107 x 138 x 68 mm |
Weight: | 395 g with paper and battery |
Warranty : | One year |
OPERATING CONDITIONS |
Temperature : | -10 C to +50C |
Storage temperature : | - 20C to +60C |
Humidity : | to 90% ambient |
Certificates : | FCC: Part 15 Subpart B, Class B EN 60950,EN 55022 Class B, EN61000-3-2, EN61000-3-3 , EN 50024 , AS/NZ 3548 Class B Meets conditions of EMC decree 89/336/EEC and 73/23/EEC, meets conditions of ANSI/UL STD 60950 and CAN/CSA STD C22.2 No. 60950-00 CB certificate, Certificate IEC 68 EFT #3046813 |